Lọc theo danh mục
  • Năm xuất bản
    Xem thêm
  • Lĩnh vực
liên kết website
Lượt truy cập
 Lượt truy cập :  24,645,839
  • Công bố khoa học và công nghệ Việt Nam

Khoa học y, dược

BB

Cao Thị Thúy Hằng, Trần Thị Thanh Vân, Trần Nguyễn Hà Vy(2), Nguyễn Thị Thuận, Võ Mai Như Hiếu, Phạm Đức Thịnh(1)

NGHIÊN CỨU KHẢ NĂNG HẤP PHỤ KIM LOẠI NẶNG (Cd, Pb) CỦA PECTIN CHIẾT TỪ LOÀI CỎ BIỂN ENHALUS ACOROIDES

INVESTIGATION OF THE HEAVY METAL ADSORPTION ABILITY (Cd, Pb) OF PECTIN EXTRACTED FROM SEAGRASS ENHALUS ACOROIDES

Tạp chí Phân tích Hóa, Lý và Sinh học

2024

2A

13

This study aims to investigate the factors affecting the adsorption process of Pb(II) and Cd(II) ions on pectin prepared from seagrass Enhalus acoroides. These factors include pH (2.0-8.0), the degree of esterification (DE), and the initial concentration of the adsorbate. The results show that the optimum adsorption pH was 5-7, and the adsorption ability of pectin increased with decreasing DE value. The adsorption of Cd(II) and Pb(II) onto seagrass pectin followed the Langmuir isotherm model. The maximum adsorption capacities of Pb(II) and Cd(II) onto pectin, calculated using the Langmuir equation, were 119.04 and 59.88 mg/g, respectively. These results suggest that seagrass pectin could be used to develop water treatment systems for removing heavy metals from contaminated water. Further research could focus on optimizing adsorption conditions, scaling up to pilot scale, and eventually applying this technology on an industrial scale.

This study aims to investigate the factors affecting the adsorption process of Pb(II) and Cd(II) ions on pectin prepared from seagrass Enhalus acoroides. These factors include pH (2.0-8.0), the degree of esterification (DE), and the initial concentration of the adsorbate. The results show that the optimum adsorption pH was 5-7, and the adsorption ability of pectin increased with decreasing DE value. The adsorption of Cd(II) and Pb(II) onto seagrass pectin followed the Langmuir isotherm model. The maximum adsorption capacities of Pb(II) and Cd(II) onto pectin, calculated using the Langmuir equation, were 119.04 and 59.88 mg/g, respectively. These results suggest that seagrass pectin could be used to develop water treatment systems for removing heavy metals from contaminated water. Further research could focus on optimizing adsorption conditions, scaling up to pilot scale, and eventually applying this technology on an industrial scale.