Lọc theo danh mục
  • Năm xuất bản
    Xem thêm
  • Lĩnh vực
liên kết website
Lượt truy cập
 Lượt truy cập :  30,138,583
  • Công bố khoa học và công nghệ Việt Nam

31.19

Hoá học

Xây dựng quy trình phân tích xácđịnh xyanua tự do trong nước bằng cách sử dụng đưa mẫu tự động qua hệ thống mao mạch điện kết hợp với đầu dò không tiếp xúc

Development of analytical procedure for determination of free cyanide in water using automatic sample injection capillary electrophoresis system coupled with contactless conductivity detector

Hóa học

2014

6

794-798

0866-7144

Background electrolyte conditions and setting condition of auto capillary electrophoresis system were studied to develop an analysis procedure for free cyanide determination in environmental water samples. CAPS buffer with added CTAB at pH 11 was selected as the mobile phase. The sample injection amount is adjusted by changing needle valve position and sample injection time. Separation process is performed at +20 kV. Developed procedure allows the quantification of cyanide with high accuracy, short analysis time, less chemicals consumption and more importantly avoiding the dangerous and complex sample handling process. The detection and quantification limit of this method are respectively 0.9 and 2.9 mg/L.

TTKHCNQG, CVv 14