Lọc theo danh mục
  • Năm xuất bản
    Xem thêm
  • Lĩnh vực
liên kết website
Lượt truy cập
 Lượt truy cập :  29,390,684
  • Công bố khoa học và công nghệ Việt Nam

Vật liệu xây dựng

Trần Văn Miền(2)(1), Đặng Thị Thúy Hằng, Nguyễn Thị Hồng Nhung, Nguyễn Thành Đạt

Nghiên cứu các tính chất của bê tông cốt sợi polypropylene dùng cho công nghệ in 3D

Study on properties of polypropylene fiber reinforced concrete for 3D printing technology

Vật liệu và Xây dựng

2021

3

14-19

1859-381X

In bê tông 3D là một sự phát triển công nghệ cao trong công nghệ xây dựng. Ưu điểm chính của kỹ thuận này là xây dựng với tốc độ nhanh, không cần ván khuôn. Nguyên vật liệu chế tạo tông in 3D gồm Xi măng, cát, nước, phụ gia siêu dẻo , phụ gia khoáng hoạt tính gồm silicafume và tro bay. Ngoài ra , có sử dung sơi polypropylen (Sợi PP) giúp cải thiện các tính chất của hỗn hợp bê tông cải thiện đáng kể khả năng liên kết các phần tử trong quá trình đùn làm cho hỗn hợp bê tông in 3D khi đùn không bị gãy, không bị đứt đoạn.

3D concrete printing technology is a high-tech development in concrete construction. The main advantage of this technique is the faster construction because of the formwork unnecessity. Materials for 3D concrete printing included cement, sand, water, chemical additives, activated mineral additives, including silica fume and fly ash. In addition, the use of polypropylene fiber (PP fiber) improved the properties of the concrete, especially in the bonding ability of the elements during extrusion, resulting in continuous 3D filament without any break or interruption. Concrete mixtures using 1% PP fiber, 11 sand to binder ratio, and the water to binder ratio from 0.32 to 0.34 were found to be suitable for making 3D concrete printing.

TTKHCNQG, CTv 171