Lọc theo danh mục
  • Năm xuất bản
    Xem thêm
  • Lĩnh vực
liên kết website
Lượt truy cập
 Lượt truy cập :  30,424,269
  • Công bố khoa học và công nghệ Việt Nam

Vi sinh vật học

Đánh giá sự hấp thụ famotidine của cellulose được tạo ra từ Acetobacter xylinum trong một số môi trường nuôi cấy

Evaluation of the famotidine absorption of cellulose produced by acetobacter xylinum in some culture media

Khoa học và Công nghệ (Đại học Thái Nguyên)

2018

4

1859-2171

Thiết kế thí nghiệm theo phương pháp quy hoạch thực nghiệm toàn phần và tối ưu hóa đường dốc nhất đã được thực hiện và tìm ra giá trị tối ưu của 3 yếu tố là nhiệt độ (20oC), chế độ lắc (180 vòng/phút) và thời gian (120 phút) cho hiệu suất nạp fomatidine tốt nhất. Cùng loại cellulose vi khuẩn, lượng thuốc hấp thụ vào cellulose vi khuẩn dày 0,5 cm nhiều hơn so với cellulose vi khuẩn dày 1 cm; nhiều nhất đạt 28,4 mg ở cellulose vi khuẩn-MTC dày 0,5 cm; ít nhất ở cellulose vi khuẩn-MTG dày 1 cm đạt 22,48 mg. Cùng độ dày 0,5 cm hoặc 1 cm, lượng thuốc hấp thụ vào cellulose vi khuẩn-MTC cao nhất đạt 28,4 hoặc 25,14 mg và thấp nhất đạt 23,28 hoặc 22,48 mg ở cellulose vi khuẩn-MTG.

Famotidine (Fa) is used in the treatment of peptic ulcer and duodenal ulcer as a histamine H2- receptor antagonist. The low oral bioavailability and short biological half-life of famotidine following oral administration promotes development of a prolonged-release carrier. Bacterial cellulose (BC) has various applications in the biomedical fields and advanced drug delivery systems. BC is produced by Acetobacter xylinum in the standard medium (STM), coconut medium (COM) and rice medium (RIM). Experimental design using an experimental planning method with full element and optimization using the steepest descent method was performed. The results of this study showed that optimization parameters concluding the temperature (20 oC), shake mode (180 rpm) and time (120 minutes) for optimal fomatidine absorption of BC. The same BC material, the amount of fomatidine absorbed into BC 0.5 cm in thickness is higher than the BC 1 cm in thickness; the highest was 28.4 mg at BC-STM 0.5 cm in thickness; At least 1 cm in thickness at BC-RIM reached 22.48 mg. As the thickness of 0.5 cm or 1 cm, the highest amount of drug absorbed into the BC-STM reached 28.4 or 25.1 mg and the lowest reached 23.28 or 22.48 mg in BC-RIM.

TTKHCNQG, CTv 178

  • [1] Zhu X.; Qi X.; Wu Z.; Zhang Z.; Xing J.; Li X. (2014), Preparation of multiple-unit floatingbioadhesive cooperative minitablets for improving the oral bioavailability of famotidine in rats,Drug Delivery, 21(6), pp. 459-466.
  • [2] Huang L.; Chen X.; Nguyen Xuan Thanh; Tang H.; Zhang L.; Yang G. (2013), Nano-cellulose 3D-networks as controlled-release drug carriers,Journal of Materials Chemistry B (Materials for biology and medicine), 1, pp. 2976-2984
  • [3] Hestrin S.; Schramm M. (1954), Synthesis of cellulose by Acetobacter xylinum, 2. Preparation of freeze-dried cells capable of polymerizing glucose to cellulose,Biochem J., 58(2), pp. 345-352.
  • [4] Badshah M.; Ullah H.; Khan S. A.; Park J. K.; Khan T. (2017), Preparation, c-haracterization and in-vitro evaluation of bacterial cellulose matrices for oral drug delivery,Cellulose, 24(11), pp. 5041-5052
  • [5] Phan Thị Huyền Vy; Bùi Minh Thy; Phùng Thị Kim Huệ; Nguyễn Xuân Thành; Triệu Nguyên Trung (2018), Tối ưu hóa hiệu suất nạp thuốc famotidin của vật liệu cellulose vi khuẩn lên men từ dịch trà xanh theo phương pháp đáp ứng bề mặt và mô hình Box-Behnken,Tạp chí Dược học, 501, tr. 3-6
  • [6] Lê Thị Phương Thảo; Lê Vĩnh Bảo; Nguyễn Thiện Hải (2014), Nghiên cứu xây dựng công thức và bào chế viên nén famotidine 40 mg,Tạp chí Y học TP. HCM, 18(2), tr. 72-77.
  • [7] Trần Hữu Tâm; Võ Ngọc Nguyên; Trương Quân Thụy; Nguyễn Thị Thanh Tâm; Nguyễn Hữu Lễ; Nguyễn Thị Thanh Hòa; Lê Hiếu Nghĩa (2013), Tối ưu hóa điều kiện sản xuất mẫu bệnh phẩm giả định mủ, đờm chứa vi khuẩn thường gặp phục vụ kiểm tra chất lượng xét nghiệm vi sinh lâm sàng,Tạp chí Y học Thực hành, 11, tr. 76-80.
  • [8] Phạm Văn Phiến; Nguyễn Thúy Hương (2013), Tối ưu hoá quá trình lên men thu nhận Bacterial cellulose từ môi trường rỉ đường và môi trường nước mía,Tạp chí phát triển KH&CN, 16(3), tr. 30-39.
  • [9] (2009), Dược Điển Việt Nam IV,