Lọc theo danh mục
  • Năm xuất bản
    Xem thêm
  • Lĩnh vực
liên kết website
Lượt truy cập
 Lượt truy cập :  19,020,737
  • Công bố khoa học và công nghệ Việt Nam

67

Vật liệu xây dựng

Trịnh Thị Châm, Cao Tú Mai

Đánh giá tính chất của thạch cao phospho tại Việt Nam

Evaluation of properties of phosphorus plaster in Vietnam

Vật liệu và Xây dựng

2023

3

43-50

1859-381X

Trên thế giới, thạch cao phospho (PG) đã được nghiên cứu và sử dụng trong nhiều lĩnh vực. Tùy thuộc nguồn gốc của quặng phosphat và công nghệ sản xuất mà PG có chất lượng khác nhau. Trong BÀI BÁO này, sẽ đưa ra các kết quả đánh giá tính chất của PG phát sinh từ 3 nhà máy hóa chất, phân bón tại Việt Nam. PG sẽ được đánh giá các tính chất như: phân định chất thải nguy hại, tính toán chỉ số hoạt độ phóng xạ, đánh giá khả năng chiết tách chất ô nhiễm ra môi trường, đánh giá thành phần hóa và tính chất cơ lý. Tuy nhiên, khi thử nghiệm khả năng thôi nhiễm các thành phần ô nhiễm trong PG ra môi trường thấy rằng PG tại DAP 1, DAP 2 còn tồn dư một số thành phần có khả năng gây ảnh hưởng tiêu cực tới môi trường. Do đó, khi sử dụng PG cho các mục đích như làm vật liệu san lấp thì cần có các biện pháp xử lý hoặc ổn định/đóng rắn các thành phần này trước khi sử dụng.

In the world, phosphogypsum has been studied and used in many fields. Depending on the origin of phosphate ore and production technology, phosphogypsum quality varies widely. In this paper, the results of characterization of PG generated from 3 chemical and fertilizer factories in Vietnam will be presented. PG is evaluated for properties such as: identification of hazardous waste, calculation of radioactivity index, assessment of the ability to extract pollutants into the environment, assessment of chemical composition and physical and mechanical properties of PG. However, when testing the ability to release contaminated components in PG into the environment, it was found that PG in DAP 1, DAP 2 still had some components that could potentially have negative effects on the environment. Therefore, when using PG for purposes such as leveling materials, measures should be taken to treat or stabilize/cure these components before use.

TTKHCNQG, CTv 171